The Claybrook outdoor collection includes some favourite tiles, enabling our clients to create seamless inside to outside looks. Floor tiles have all the increased slip resistance required, whilst wall tiles are of course water and frost resistant. However, style is not bypassed in favour of functionality, these ranges are a positive visual addition to both modern and classic exterior design schemes. Perfect for patio’s, gardens or balconies, they can help transform the space, without huge additional cost.
Outdoor floor tiles need not be the sandstone flagstones of old getting somewhat mossy and degraded over time. We have a number of highly durable porcelain outdoor tiles that are not just practical but add design style. Westchester is a stone effect porcelain in three colourways all available in 2cm, ideal for outdoor use, while Conchology is a limestone effect porcelain with each of the shades having micro fossils integral to the design. Merestone, in three warm hues, looks like stone in that it has rustic edging but is also a highly practical outdoor porcelain. For a modern concrete or industrial style, try our Concretopia outdoor porcelain range to contribute to this look. We also have outside wall tile collections like Parasol that add decoration, while being able to withstand the British climate.
The floor tiles in our Outdoor Tiles section all have the appropriate slip rating for outdoor use. Meaning they have a surface friction rough enough for use in places that get wet (R11, if you’re feeling technical!) but not pool on the surface. So just like any exterior surface, good drainage is the key to making them completely safe, as even the most textured surface cannot overcome the aquaplaning combination of puddles and running/fast walking.
Porcelain is a highly durable material that can cope with temperature highs and lows. Our 2cm thick floor tiles are specifically designed to be hardwearing. It also enables them to be laid on ground prepared in the same way as patio’s and garden pathways. For decorative walls outside, our slimmer decorative porcelains like Discotheque or Semaphore are frost-resistant and as long as they are correctly installed, will be weather resistant (see our Tile Installation Guide for guidance).
Our outdoor porcelain floor tiles are 2cm deep, this means that they can be laid in the same manner as natural stone or paving slabs, but are better at withstanding wear, weight and our (ever-changeable) weather.
It’s important to use the correct grout width (which you will find in the Technical Information for each tile) and the right grout. Large areas (more than 2-3 metres in any one direction) will also require expansion joints to allow for surface expansion and contraction, without causing damage to tiles. Grout like our Ardex FL product will also help with weed control, making it easier to keep those pesky dandelions at bay.
You can find recommendations for which grout and the appropriate adhesive to use in the Technical Information listed for each tile, or our Tile Installation Guide. You can also order all of the correct adhesive and grouts from us as they are tested on our ranges. We also suggest using LTP EcoProtec Porcelain Pre Grout Protector, as it will help the tiler when cleaning off the excess grout.
Our porcelain outdoor tiles do not require sealing but sometimes we do apply Pre Grout Protector, see above.
We recommend cleaning our outdoor tiles with LTP EcoProtec Stone & Porcelain Aftercare Cleaner. Pressure washing is also effective, but try to avoid the grout joints, as too much water under pressure can cause them to fail.
Outdoor porcelain tiles require careful installation, with the correct preparation, suitable exterior-grade materials and adequate drainage all important for a long-lasting finish. We recommend using an experienced tiler or landscaper familiar with laying 2cm porcelain tiles outdoors. For advice, read our Outdoor Installation Guide below.